Complete Freewheels FBL - Turkey

Complete Freewheels FBL with RINGSPANN shaft coupling are sealed sprag freewheels with ball bearings for coupling two shafts. They are supplied oil-filled and ready for installation, on customer request with biodegradable oil.

In addition to the standard type, two other types are available for extended service life. Nominal torques up to 8 000 N...

Brake Caliper DV ... PFM - Turkey

Cone Clamping Elements RLK - Turkey

Features


Centres the shaft to the hub
Short axial width
No axial displacement between hub and shaft during clamping procedure due to fixed backstop point
For shaft diameters between 20 mm and 200 mm

Shrink Discs RLK - Turkey

Features


Highest torque capacity
Transmissible torque of 330 Nm up to 113500 Nm
Easy, quick assembly by tightening ­clamping screws without a torque wrench
Distance-controlled assembly ensures ­guaranteed transmissible torques
Enclosed design, therefore impervious to dirt
True running even at high speeds
Centres the hollow...

Gear Couplings RDZ … DTO - Turkey

Features


High nominal torques up to 391 500 Nm
High misalignment capability
Compensation of axial, radial and angular misalignments
Double engagement allows smooth torque transmission
Compact design due to inside turned hubs
Complies with the AGMA standard (American Gear Manufacturer Association) up to coupling size 0090
High powe...

Grid Couplings RES … EYO - Turkey

Features


High nominal torques up to 335 500 Nm
Compensation of axial, radial and angular misalignments
Initial damps torsionally vibration, at higher torques torsionally rigid
Gradual increase in torsional rigidity as torques increase
Horizontally split cover
Easy replacement of the grid

Low Speed Backstops - Turkey

Features


Low Speed Backstops FRHD with lever arm are sealed sprag freewheels with ball bearings. They are supplied oil-filled and ready for installation.
The Low Speed Backstops FRHD are arranged on through shafts or shaft ends.
Nominal torques up to 900 000 lb-ft.
Bores up to 21 inch.

Push/Pull Cables - Turkey

Features


Push force: 200 N (~ 20 kg)
Pull force: 250 N (~ 25 kg)
Travel: 76 mm (~ 3 inch)
Bending radius: 51 mm
Low slip-stick effect thanks to teflon coated inner member
Aluminum T-Grip cap, connection thread M10x1
Stainless steel connection part
M5 thread on moving end part
Diameter of cable fixture: 12 mm (7/16-20 UNF threa...

Brake Caliper MV - Turkey

The brake caliper MV 022 FEM is a very compact and high efficient disc brake with very low power consumption. Its floating bearing compensates small misalignments of the brake disc.
The enclosed and robust design enables use in difficult ambient conditions with frequent braking operations. The attached electronic reduces the power consumption in o...