ADLEMA MAKİNA TEKNOLOJİLERİ A.Ş.

Adlema BT4000 Series Leak Testing Devices use the pressure decay method with its precision that catches even the smallest leaks. It manages conveyor systems thanks to its internal PLC module, 8 externally usable inlets and 8 outlets, EtherCAT protocol and remote I/O modules. Adlema BT4000 Series Leak Testing Devices are suitable for production lines with a wide measuring range of -1, +40 Bar.

Adlema BT1000 Standard Level Leak Testing Devices using the pressure decay method operate in the measuring range of -1,+25 Bar. BT1000 devices that can test leaks caused by manufacturing defects require longer test times compared to advanced versions. Standard level testing devices, which can be preferred in applications with lower precision, are an ideal application for catching relatively lar ...

Exposure of electronic components to dust, dirt, and steam causes negative effects on products. These negative effects can manifest as corrosion, short circuits, or performance problems.

In order to prevent these results, leak tests of electronic products should be performed. In applications where it is not possible to pressurize electronic products and the internal volume, the extern ...

Adlema leak jets are used for daily inspection of your leak testing device and installed system by plugging into the port on the device.

It allows you to use your system reliably by turning your approved product into a slightly leaking sample. The leak rate is produced according to the standards and sectoral norms. Leak jets are delivered with an additional calibration certificate upo ...

CZ Series Quick Connectors can seal female/male threads or straight holes from inside or outside diameters. Specially produced latex gaskets have high durability for high-frequency usage. Besides sealing the product, it also includes a test port for applying test air to the product.

Thus, the product is both sealed and ready for the leak test. With the pneumatic piston or manual mecha ...

Barcode printers work in integration with test devices to produce a label for each test result, in order to stick barcodes containing parameters such as product serial number, batch number, date, test pressure, test time, amount of leakage, APPROVEDL/REJECTED on the tested products.

By integrating barcode readers into the test device, it provides the opportunity to perform retrospecti ...