Product 2025
G-Box 2 Mercedes Benz Equipment For IM608 Device (Turkey)
G-Box 2 Mercedes Benz Equipment For IM608 Device
Save
01 / 01
Description
Autel G-Box Accessory Tool
- To use with both the Autel MaxiIM IM608 and Auro IM600. The Autel G-Box is designed to be used on Mercedez-Benz vehicles with DAS3 CAN EIS/EZS in AKL. It helps to reduce the time for reading the ECU data from W204 and W207 EISs by over 85%.
- The G-BOX2 realizes fast mode on vehicle and bench when all keys for Mercedes-Benz vehicles using ths DAS3 EIS/EZS are lost. The use of the G-BOX2 reduces the time needed and eliminates the process of insertion and removal.
- The G-BOX2 can read and access most engines manufactured by Bosch including EDS/ MEx17 series engines used in for BMW and for Volks wagen Vehicles. This capability supports the ability to perform adaptions when all keys are lost and engine is replaced.
- The G-BOX2 is compatible with the Autel’s advanced diagnostic tablets support IMMO and key programming functions.
Autel G-Box Main Features:
- 1. For Mercedes Benz All Keys Lost, Faster Password Calculation
- 2. Used with IM608
- 3. Used for Faster Mercedes ECU data and EIS password calculation
- 4. For Mercedes DAS3 can EIS / EZS all keys lost
- 5. Reduce time reading W204 ECU data & W207 EIS by over 85%
- 6. No need to remove and reinsert the key for W221 & W164 after 2009 models
- 7. For BMW DME / DDE ISN reading and writing in boot mode
- 8. G-Box is compatible with both the Autel MaxiIM IM 608 and IM508 with XP400, also compatible with Auro IM600 and Auro IM100 with XP400
- DC Port -Provides +12 DV power supply
- Can-H Port: Universal Can Bus interface, connects with OBDII PIN6
- K1 Port: Universal K-Line interface, connects with OBDII PIN1
- Status Indicator: Indicates the current operating status
- Relay Ports: Connect with dedicated relay cables
- +12V Power Port: Universal power input/ output port
- OBDII Connector: Connects to the vehicle’s OBDII directly or via a dedicated extension cable
- OBDII Female Connector: Connects to the main cable of Autel Diagnostic Tool
- Can-L Port: Universal Can Bus interface, connects with OBDII PIN14
- K7 Port: Universal K-Line interface connects with OBDII PIN7
- GND Port: Universal Power Input/ Output Port
- OB15 Port: Used with dedicated BD15 Cable for reading and wrting multiple types of ECUs
Difference Between GBOX1 & GBOX2?
G-BOX1 vs G-BOX2:
1. Mercedes DAS3 add keys and all keys lost on bench. (both)
2. Mercedes DAS3 all keys lost on vehicle. (both)
3. Read engine control module password by boot. (both)
4. Read Bosch ME/MED/MEVD/EDC 17 Engine control module password on the bench. (G-BOX2 only)
